Our tough wheeled case with a Telescoping handle provides easy portability while in transit to a location.  Push down the handle and lock with the Quick Release Pin inside the case.
Plug one end of the AC Adapter into the DC power jack on the side of the case and the other end into a 110-volt wall outlet. 
On location, front and top handles are easily removed by pulling out the Quick Release Pins.  Insert the pins into the handles and safely store inside the case. 
Set the alarm by switching the Locking Toggle Switch to the ON position.  Remember to lock the front chrome key latches on the case for no access.  The Sentry Case is now armed.  A replaceable 9V battery comes installed in the Electronic Enclosure, and should be replaced as needed observing the polarity with the + side up. 

 
Insert one end of the Steel Cable through the Telescoping Handle, and push the handle down into the case.  Lock the handle inside the case with the supplied Quick Release Pin.
Metal Key Latches:   Two easy-to-open front latches with chrome-metal keys are included.  These secure case lid latches provide quick access to your equipment and the final level of security to keep your equipment safe. 
Insert Steel Cable through an object and secure with a lock of your choice (not supplied).  Be sure to close and lock the lid.
Padlock Holes:  Each case has two molded-in padlock holes to secure your valuables.  Our padlock holes will accept most standard padlocks, and can be used with a TSA Airline approved lock when traveling by air.